A
-
Abdolkhani, Ali
Modeling and Predicting the optimal conditions in microcrystal cellulose production from bagasse using the Response Surface Methodology (RSM) [Volume 13, Issue 2, 2022, Pages 225-238]
-
Abdolkhani, Ali
Production of nanocrystals and nanofibrils from unbleached and bleached soda pulp with ECFlight bleaching sequence and comparison of their morphological and thermal properties [Volume 13, Issue 4, 2023, Pages 457-471]
-
Abdolmaleki, Hamid
Modeling and Predicting the optimal conditions in microcrystal cellulose production from bagasse using the Response Surface Methodology (RSM) [Volume 13, Issue 2, 2022, Pages 225-238]
-
Ahmadi, mohammad
Strengthening of the cross-laminated timber using glass fiber-reinforced polymer on the lateral performance of the single shear lap joints [Volume 13, Issue 1, 2022, Pages 1-14]
-
Ahmadi, Mohammad
Structural properties and thermal stability of nano crystalline cellulose produced from waste paper [Volume 13, Issue 1, 2022, Pages 37-47]
-
Ahmadi, Mohammad
Investigation of using rice hask and paper waste to make free copper brake lining [Volume 13, Issue 1, 2022, Pages 61-70]
-
Ahmadi saeedabad, Fatemeh
Life cycle assessment of SMF and GMF Fluting paper production process [Volume 13, Issue 3, 2022, Pages 249-259]
-
Akbarpour, Iman
Environmental and strength properties evaluation of bleached recycled pulp with calcium hydroxide [Volume 13, Issue 1, 2022, Pages 71-81]
-
Akbarpour, Iman
Investigation on the bleachability of hemicellulase-deinked pulp versus chemical deinking process [Volume 13, Issue 3, 2022, Pages 289-300]
-
Amini, Amir
Investigation on the Possibility of Physical and Mechanical Properties Modification of Wood-Plastic Nanocomposites By Microwave Radiation [Volume 13, Issue 3, 2022, Pages 261-273]
-
Aminian, Hedayatollah
Particles from grapevine pruning residue as a bio-based substitute for wood in hybrid particleboard production [Volume 13, Issue 4, 2023, Pages 509-518]
-
Aref, Masoumeh
Investigating the effect of brand gender on brand loyalty with emphasis on the mediating role of brand love and perceived brand quality in Pak Choub Industrial Group [Volume 13, Issue 4, 2023, Pages 473-486]
-
AZADFALLAH, MOHAMMAD
The effect of incorporating cellulose and chitosan nano-fibers into pigment coating formulation on the physical
and mechanical properties of Testliner [Volume 13, Issue 2, 2022, Pages 133-145]
-
Azizian Nasnar, Ali
Environmental and strength properties evaluation of bleached recycled pulp with calcium hydroxide [Volume 13, Issue 1, 2022, Pages 71-81]
B
-
Bahmani, Mohsen
Investigation of ِDecay Resistance of Poplar Plywood with Encapsulated Pesticides [Volume 13, Issue 2, 2022, Pages 201-212]
-
Broushakian, Vahid
Moisture induced stresses in cross laminated timers (CLT) made from hydrothermally modified fir wood [Volume 13, Issue 4, 2023, Pages 497-507]
C
-
Chavooshi, Arash
Simulation and prediction of bending performance of wood plastic composite profiles using finite element method by ANSYS Workbench software [Volume 13, Issue 3, 2022, Pages 325-344]
D
-
Dahmardeh Ghalehno, Mohammad
Investigation of ِDecay Resistance of Poplar Plywood with Encapsulated Pesticides [Volume 13, Issue 2, 2022, Pages 201-212]
-
Dahmardeh Ghalehno, Mohammad
Influence of additive of Chlorophytum comosum plant extract on physicochemical, structural and mechanical properties of urea formaldehyde resin [Volume 13, Issue 3, 2022, Pages 361-373]
-
Djafari Petroudy, Seyed Rahman
Hydrogel composite based on thermal modified carboxymethyl cellulose and nanozeolite [Volume 13, Issue 4, 2023, Pages 433-443]
E
-
Ebrahimpour Kasmani, Jafar
The effect of different additives on the properties of handsheet prepared from office waste paper [Volume 13, Issue 2, 2022, Pages 119-131]
-
EMAMINASAB, ,MOHAMMAD
Modeling and Predicting the optimal conditions in microcrystal cellulose production from bagasse using the Response Surface Methodology (RSM) [Volume 13, Issue 2, 2022, Pages 225-238]
F
-
Farrokhpayam, Saeed reza
Investigation of ِDecay Resistance of Poplar Plywood with Encapsulated Pesticides [Volume 13, Issue 2, 2022, Pages 201-212]
-
Farrokhpayam, Saeed reza
Identification and determination of the effect of factory control variables on the physical and mechanical properties of medium density fiberboard with artificial neural network system [Volume 13, Issue 3, 2022, Pages 275-287]
-
Farsi, Mohammad
Investigation on the Possibility of Physical and Mechanical Properties Modification of Wood-Plastic Nanocomposites By Microwave Radiation [Volume 13, Issue 3, 2022, Pages 261-273]
-
Feghhi, Zahra
Investigation on the mechanical and optical properties of kraft paper coated with a combination of pectin, polyvinyl alcohol and nano titanium dioxide [Volume 13, Issue 1, 2022, Pages 15-25]
-
Fischer, Steffen
Production of nanocrystals and nanofibrils from unbleached and bleached soda pulp with ECFlight bleaching sequence and comparison of their morphological and thermal properties [Volume 13, Issue 4, 2023, Pages 457-471]
G
-
Ghaffari Moghaddam, Mansour
Investigation of the use of tetramethyl orthosilicate (Alkoxysilane) on compatibility, mechanical and physical properties of wood-cement particleboard [Volume 13, Issue 4, 2023, Pages 419-431]
-
Ghahramani, Saleh
Production of nanocrystals and nanofibrils from unbleached and bleached soda pulp with ECFlight bleaching sequence and comparison of their morphological and thermal properties [Volume 13, Issue 4, 2023, Pages 457-471]
-
Ghasemi, haniyeh
Investigation of the use of tetramethyl orthosilicate (Alkoxysilane) on compatibility, mechanical and physical properties of wood-cement particleboard [Volume 13, Issue 4, 2023, Pages 419-431]
-
Ghasemian, Ali
Environmental and strength properties evaluation of bleached recycled pulp with calcium hydroxide [Volume 13, Issue 1, 2022, Pages 71-81]
-
Ghasemian, Ali
Investigation on the bleachability of hemicellulase-deinked pulp versus chemical deinking process [Volume 13, Issue 3, 2022, Pages 289-300]
-
Ghofrani, Mohammad
The study of Effective Factors On Selecting Finish Type and Color Spectrum and Finishing Method In The Industry Of Home Furniture (Case Study: Tehran Province) [Volume 13, Issue 2, 2022, Pages 147-160]
-
Gholamiyan, Hadi
Wood anatomy and fiber biometry of pomegranate wood (Punica granutum L.) in a radial and longitudinal direction of tree [Volume 13, Issue 4, 2023, Pages 487-496]
-
Gholipour, Ali
Investigating the effect of brand gender on brand loyalty with emphasis on the mediating role of brand love and perceived brand quality in Pak Choub Industrial Group [Volume 13, Issue 4, 2023, Pages 473-486]
-
Ghorbannezhad, Payam
Performance of perlite as an adsorbent on the physical treatment of cellulose industry wastewater [Volume 13, Issue 3, 2022, Pages 313-323]
H
-
Haghighimanesh, Hossein
Comparison of physical and mechanical properties of Pinus taeda wood with common fast-growing species [Volume 13, Issue 3, 2022, Pages 345-359]
-
Hajializadeh, Farajolah
Strengthening of the cross-laminated timber using glass fiber-reinforced polymer on the lateral performance of the single shear lap joints [Volume 13, Issue 1, 2022, Pages 1-14]
-
Hajializadeh, Farajolah
Structural properties and thermal stability of nano crystalline cellulose produced from waste paper [Volume 13, Issue 1, 2022, Pages 37-47]
-
Hajihassani, Reza
Effect of brown rot fungus on the functional characteristics of heat treated wood [Volume 13, Issue 2, 2022, Pages 161-170]
-
Hamzeh, Yahya
The effect of incorporating cellulose and chitosan nano-fibers into pigment coating formulation on the physical
and mechanical properties of Testliner [Volume 13, Issue 2, 2022, Pages 133-145]
-
Hasanpour, Ghazal
Enhancement of recycled board strength by surface treatment and additives on size-press section [Volume 13, Issue 1, 2022, Pages 97-106]
-
Hedjazi, Sahab
Production of nanocrystals and nanofibrils from unbleached and bleached soda pulp with ECFlight bleaching sequence and comparison of their morphological and thermal properties [Volume 13, Issue 4, 2023, Pages 457-471]
-
Heydari, Farzaneh
Influence of additive of Chlorophytum comosum plant extract on physicochemical, structural and mechanical properties of urea formaldehyde resin [Volume 13, Issue 3, 2022, Pages 361-373]
-
Hoseinzadeh, Abolfazl
Particles from grapevine pruning residue as a bio-based substitute for wood in hybrid particleboard production [Volume 13, Issue 4, 2023, Pages 509-518]
-
Hosseini, SeyedAli
A Comparison on the performance of cationic starch in external and internal applications for recycled linerboard [Volume 13, Issue 3, 2022, Pages 301-311]
-
Hosseinzade, Jaber
Modeling and Predicting the optimal conditions in microcrystal cellulose production from bagasse using the Response Surface Methodology (RSM) [Volume 13, Issue 2, 2022, Pages 225-238]
I
-
Izadyar, Soheila
Production of nanocrystals and nanofibrils from unbleached and bleached soda pulp with ECFlight bleaching sequence and comparison of their morphological and thermal properties [Volume 13, Issue 4, 2023, Pages 457-471]
J
-
Jahan Latibari, Ahmad
Investigation on the bleachability of hemicellulase-deinked pulp versus chemical deinking process [Volume 13, Issue 3, 2022, Pages 289-300]
-
Jamalirad, Loya
Investigation of the mechanical-dynamic and thermal properties of nanocomposites manufactured from rapeseed stalk flour/ nanographene and high-density polyethylene [Volume 13, Issue 4, 2023, Pages 445-456]
-
Jamalirad, Loya
Particles from grapevine pruning residue as a bio-based substitute for wood in hybrid particleboard production [Volume 13, Issue 4, 2023, Pages 509-518]
-
JAVID, EMAD
The effect of incorporating cellulose and chitosan nano-fibers into pigment coating formulation on the physical
and mechanical properties of Testliner [Volume 13, Issue 2, 2022, Pages 133-145]
K
-
Karamdost Marian, Behrouz
Comparison of physical and mechanical properties of Pinus taeda wood with common fast-growing species [Volume 13, Issue 3, 2022, Pages 345-359]
-
Kashkouli, Mahdi
Performance of perlite as an adsorbent on the physical treatment of cellulose industry wastewater [Volume 13, Issue 3, 2022, Pages 313-323]
-
Khosravani, َAmir
Enhancement of recycled board strength by surface treatment and additives on size-press section [Volume 13, Issue 1, 2022, Pages 97-106]
-
Khosravani, َAmir
A Comparison on the performance of cationic starch in external and internal applications for recycled linerboard [Volume 13, Issue 3, 2022, Pages 301-311]
-
Khosravani, َAmir
Fluorescent labling methods by rhodamine B isothiocyanate in cellulose Materials [Volume 13, Issue 4, 2023, Pages 405-417]
-
Kiaei, Majid
Investigation on the Possibility of Physical and Mechanical Properties Modification of Wood-Plastic Nanocomposites By Microwave Radiation [Volume 13, Issue 3, 2022, Pages 261-273]
M
-
Maashi Sani, Fatemeh
Investigation on the Possibility of Physical and Mechanical Properties Modification of Wood-Plastic Nanocomposites By Microwave Radiation [Volume 13, Issue 3, 2022, Pages 261-273]
-
Mahdavi, Saeed
The effect of different additives on the properties of handsheet prepared from office waste paper [Volume 13, Issue 2, 2022, Pages 119-131]
-
Mansouri, Hamid Reza
Influence of additive of Chlorophytum comosum plant extract on physicochemical, structural and mechanical properties of urea formaldehyde resin [Volume 13, Issue 3, 2022, Pages 361-373]
-
Masoumi, Abasali
The study of Effective Factors On Selecting Finish Type and Color Spectrum and Finishing Method In The Industry Of Home Furniture (Case Study: Tehran Province) [Volume 13, Issue 2, 2022, Pages 147-160]
-
Mirjafari kanjani, ehsan
Provide a strategic marketing model in the furniture industry based on exploratory mixed research plan [Volume 13, Issue 2, 2022, Pages 171-186]
-
Mohammadpour Kaliji, Majid
Surface modification of cellulose nanocrystals using radio-frequency plasma [Volume 13, Issue 1, 2022, Pages 49-60]
-
Mohebby, Behbod
Moisture induced stresses in cross laminated timers (CLT) made from hydrothermally modified fir wood [Volume 13, Issue 4, 2023, Pages 497-507]
-
Mousavi, Valiullah
Investigating the bending creep behavior of poplar wood plastic plywood manufactured by thermoplastic films [Volume 13, Issue 4, 2023, Pages 393-403]
N
-
Nabavi, ashkan
Life cycle assessment of SMF and GMF Fluting paper production process [Volume 13, Issue 3, 2022, Pages 249-259]
-
Najafi, Abdollah
Investigating the bending creep behavior of poplar wood plastic plywood manufactured by thermoplastic films [Volume 13, Issue 4, 2023, Pages 393-403]
-
Nazerian, Morteza
Performance of perlite as an adsorbent on the physical treatment of cellulose industry wastewater [Volume 13, Issue 3, 2022, Pages 313-323]
O
-
Orand, Mahin
The effect of corn zein coating on the strength and barrier properties of liner paper [Volume 13, Issue 2, 2022, Pages 213-223]
P
-
Partovinia, Ali
Performance of perlite as an adsorbent on the physical treatment of cellulose industry wastewater [Volume 13, Issue 3, 2022, Pages 313-323]
-
Piri, Mojtaba
Investigation of ِDecay Resistance of Poplar Plywood with Encapsulated Pesticides [Volume 13, Issue 2, 2022, Pages 201-212]
-
Pizzi, Antonio
Influence of additive of Chlorophytum comosum plant extract on physicochemical, structural and mechanical properties of urea formaldehyde resin [Volume 13, Issue 3, 2022, Pages 361-373]
R
-
Rahmaninia, Mehdi
The Influence of Mixing Method of lignocellulosic Nanofibers with Recycled Pulp in the Presence of Microparticle System on the Final Paper Properties [Volume 13, Issue 1, 2022, Pages 103-113]
-
Rahmaninia, Mehdi
A Comparison on the performance of cationic starch in external and internal applications for recycled linerboard [Volume 13, Issue 3, 2022, Pages 301-311]
-
Rangavar, Hossein
Modification of The Beech (Fagus orientalis) Wood Properties via Electricity [Volume 13, Issue 1, 2022, Pages 27-35]
-
Rasooly Garmaroody, Esmail
Hydrogel composite based on thermal modified carboxymethyl cellulose and nanozeolite [Volume 13, Issue 4, 2023, Pages 433-443]
-
Resalati, Hosain
The effect of corn zein coating on the strength and barrier properties of liner paper [Volume 13, Issue 2, 2022, Pages 213-223]
-
Resalati, Hossein
Investigation on the bleachability of hemicellulase-deinked pulp versus chemical deinking process [Volume 13, Issue 3, 2022, Pages 289-300]
-
Rostampour haftkhani, akbar
Simulation and prediction of bending performance of wood plastic composite profiles using finite element method by ANSYS Workbench software [Volume 13, Issue 3, 2022, Pages 325-344]
-
Rostampour-Haftkhani, Aَkbar
Strengthening of the cross-laminated timber using glass fiber-reinforced polymer on the lateral performance of the single shear lap joints [Volume 13, Issue 1, 2022, Pages 1-14]
-
Rudi, Hamidreza
Effect of Self-assembly Layering Factors of Cationic Starch on Pulp Zeta Potential [Volume 13, Issue 1, 2022, Pages 83-96]
S
-
Samariha, Ahmad
The effect of different additives on the properties of handsheet prepared from office waste paper [Volume 13, Issue 2, 2022, Pages 119-131]
-
Samariha, Ahmad
The effect of heat treatment on anatomical, physical, color and mechanical properties of birch wood [Volume 13, Issue 4, 2023, Pages 519-529]
-
Sayadi Milani, Homa
The Influence of Mixing Method of lignocellulosic Nanofibers with Recycled Pulp in the Presence of Microparticle System on the Final Paper Properties [Volume 13, Issue 1, 2022, Pages 103-113]
-
Sedghi, Mehrdad
Particles from grapevine pruning residue as a bio-based substitute for wood in hybrid particleboard production [Volume 13, Issue 4, 2023, Pages 509-518]
-
Shamsian, Mohammad
Investigation of the use of tetramethyl orthosilicate (Alkoxysilane) on compatibility, mechanical and physical properties of wood-cement particleboard [Volume 13, Issue 4, 2023, Pages 419-431]
-
Sharifi, Seyed Hassan
Investigation on the mechanical and optical properties of kraft paper coated with a combination of pectin, polyvinyl alcohol and nano titanium dioxide [Volume 13, Issue 1, 2022, Pages 15-25]
-
Sharifi, Seyed Hassan
Life cycle assessment of SMF and GMF Fluting paper production process [Volume 13, Issue 3, 2022, Pages 249-259]
-
Sheikhali, Hafezeh
Fluorescent labling methods by rhodamine B isothiocyanate in cellulose Materials [Volume 13, Issue 4, 2023, Pages 405-417]
-
Sorinezami, Ziba
Influence of additive of Chlorophytum comosum plant extract on physicochemical, structural and mechanical properties of urea formaldehyde resin [Volume 13, Issue 3, 2022, Pages 361-373]
T
-
Tajvidi, Mehdi
Enhancement of recycled board strength by surface treatment and additives on size-press section [Volume 13, Issue 1, 2022, Pages 97-106]
-
Torkaman, Javad
Modification of The Beech (Fagus orientalis) Wood Properties via Electricity [Volume 13, Issue 1, 2022, Pages 27-35]
Y
-
Yari Firouzabadi, Zahra
Investigation of the mechanical-dynamic and thermal properties of nanocomposites manufactured from rapeseed stalk flour/ nanographene and high-density polyethylene [Volume 13, Issue 4, 2023, Pages 445-456]
Z
-
Zarea Hosseinabadi, Hamid
Designing, Manufacturing and mechanical investigating of joint in laminated stringer of spiral stairs from poplar wood [Volume 13, Issue 3, 2022, Pages 375-391]
Your query does not match with any item